Siberian arshin
Industrial endoscopes

Central office:
21, Timakova st., Tomsk, Russia

Address for correspondence:
Box # 4452, Tomsk-28, Russia, 634028 

Tel.: +7 (3822) 41-65-12, 41-70-34

Fax: +7 (3822) 41-65-12

E-mail: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it

Homepage arrow Технические эндоскопы arrow Industrial videoendoscope Piton

Industrial videoendoscope Piton with flexible insertion tube

 

Videoendoscope Piton is a multipurpose system for efficient inspection in all industrial applications, including power-generating plants, chemical, oil and gas plants, piping systems, locomotive and aircraft maintenance.

Video endoscopes Piton are designed for:
– remote visual inspection of long cylindrical objects like pipes, headers etc. with length up to 25 m;
– visual inspection of technically sophisticated units and blocks hided from direct view;
– operative inspection of containers, reservoirs without external light aimed to check presence of foreign objects and to inspect mechanisms and technical equipment.

Endoscope Piton includes:
– unit designed to transmit video signal from camera unit mounted on flexible insertion tube (hereinafter referred to as «transmitting unit»);
– unit designed to receive and recorder video signal (hereinafter referred to as «receiving unit»).

The model range of endoscope Piton includes following models:
– SMT-10-P13-TV15 (Insertion tube length – 10 m, Camera unit diameter – 15 mm, P – Piton, TV – videoscope);
– SMT-15-P13-TV15 (Insertion tube length – 15 m, Camera unit diameter – 15 mm, P – Piton, TV – videoscope);
– SMT-20-P13-TV15 (Insertion tube length – 20 m, Camera unit diameter – 15 mm, P – Piton, TV – videoscope);
– SMT-25-P13-TV15 (Insertion tube length – 25 m, Camera unit diameter – 15 mm, P – Piton, TV – videoscope).

 

Technical specifications

Videoendoscope includes:

– transmitting unit;
– receiving unit

Flexible insertion tube

Tough polymeric with external wear resistant steel braid

Working length of insertion tube
10; 15; 20; 25 m
Diameter of insertion tube
13,5 mm
Camera unit length
35 mm
Camera unit diameter
15 mm
Distal end
Flex and stay tube 150 mm long
Distal end articulation

Any way ± 180° manually adjustable (it is possible to adjust distal end bend before work with the endoscope)

Rotation of the insertion tube
± 180° with the help of extender or by manual rotation of the insertion tube
Camera unit
Analog CMOS miniature color video camera with integrated LEDs lighter
TV camera resolution
380 TVL
Light source
8 LEDs
Video data transmission
Wireless, 2.4 GHz or by cable at a distance up to 7 m
Video player and recorder
Portable video capture device with HDD
Display
4 inches TFT LCD, 480×272 pixels
Field of view (FOV)
50°
Depth of field with LEDs lighter
up to 1 m (focus is adjusted by manual objective rotation)
File formats
MPEG-4, 640×480 pixels
Operating temperatures
0-40° C
Waterproof
No
Power input
2 lead-acid batteries, 2,2 Ah, 12 V

Weight (gross), including:
– receiving unit
– transmitting unit
– centralizer
– charger

From 32,8 kg
5,0 kg – 1 no.
from 16,0 kg – 1 no.
11,0 kg – 1 set
0,8 kg – 1 no.

Size (HxWxD)
– receiving unit
– transmitting unit
 
370×310×145 mm
400×400×280 (to 315) mm

 

Features
The following actions could be performed using endoscope Piton:
– visual inspection with real-time video on the display;
– video recording and further viewing and examination of possible defects;
– playing recorded video files;
– uploading recorded video files to computer for further processing and archiving;
– external TV-set or video-recorder connection to the receiving unit;
– external TV-set or projector connection to the portable video player.

Transmitting unit consists of a barrel mounted on firm steel frame. Flexible insertion tube can be easily wound off through guide arm. In the center of the barrel battery module is situated.

On the control panel the following elements are placed: power indicator, lighter regulator, battery discharge indicator, charger XLR socket, power switch and six studs to prevent insertion tube from deformation.

Insertion tube is flexible and ends with distal end and camera unit connector. Distal end articulation is manually adjustable. In case of radial inspection one should bend distal end before work and rotate insertion tube during inspection.

Resolution of video endoscope is higher than resolution of fiber-optical endoscopes but is limited by physical resolution of video cameras (about 400 TVL).
 
Power lighter scheme is based on LED driver to provide constant lighter voltage and constant brightness even when the battery is partially discharged.

Receiving unit is mounted in the handy aluminium safe case. On the control panel of receiving unit the following elements are placed: battery module, video player, video player case, video player charger, composite video out connector, charger XLR socket, power button, power indicator and battery discharge indicator.

Transmitting and receiving units are not connected with wires. To transmit video signal wireless technology is used. Thus transmitting and receiver units can be placed separately during inspection at the distance between each other up to 7 m. This provides additional mobility to the endoscope Piton.

Portable video capture device with embedded HDD is used to recorder inspection results and to upload video files to computer or laptop for further processing and archiving.

For power supply lead-acid accumulator batteries DELTA DT12022 of 2.2 Ah capacity are used. Batteries are hermetically sealed and made on technology with the gel electrolyte. One battery is mounted inside the transmitting unit and another — inside the receiving unit.

For charging these batteries ANSMANN ALCS 2-24A charger is used. Factory crocodile clips are replaced with XLR-jack. Charger provides overcharging protection, trickle charge and protection against short-circuit and reverse-connect.

For internal inspection of cylindrical objects like pipes special mechanical equipment is used. It consists of centrator, spacers and extender sections.

Centrator is used for axial positioning of the insertion tube inside the cylindrical object.

Three bundles of spacers have different length and make it possible to centralize the insertion tube inside pipes with diameter from 100 to 300 mm and more.

With the help of extender one could push the centrator and manipulate insertion tube inside pipes.

Attention! Endoscope Piton is designed only for industrial purposes. It is prohibited to use the endoscope for medical purposes.
Endoscope Piton is not designed for inspection of corrosive environment, highly inflammable liquids (petrol, kerosene, oils etc.), acids, alkalies, dissolvents, highly explosives and radioactive materials.
It is strongly prohibited to immerse insertion tube in any liquids (including water). It is also prohibited to inspect petrol level in petrol tanks.
 
Endoscope Piton delivery set
1 Videoendoscope Piton

1.1 Transmitting unit

Видеоэндоскоп Питон

1.2 Receiving unit

Видеоэндоскоп Питон

2 Two lead-acid batteries (2 batteries are placed into both units and 2 are spare)

Видеоэндоскоп Питон

3 Charger ANSMANN ALCS 2-24A

Зарядное устройство ANSMANN
4 Video system

4.1 Portable Multimedia Cables Player

Видеоплейер
5 Case for transmitting unit
Укладочный ящик

6 Technical documentation and Instruction manual

Паспорт

7 Centralizer

Centrilizer includes:

7.1 Centrator
7.2 Spacers (3 bundles)
7.3 Extender sections
7.4 Bag for centralizer

Центрирующее устройство

 
< PrevТехнический эндоскоп «Томь» - компактный волоконно-оптический эндоскоп   Industrial waterproof videoendoscope Piton-GDNext >
[ Back ]